LOW CARBON TECLUX
LED Neon Flex Manufacturer
We manufacture LED neon flex for facades, signs and landscapes: the NEON-1010 10x10mm top-bend silicone tube with dot-free CRI90+ light, sealed IP67 for outdoor runs. More profiles are on the way and this page grows with the range. Start from the full product catalog or pair outlines with our garden lighting solution.
Led Neon Flex
10×10mm top-bend silicone neon flex for facades and signs
What our LED neon flex covers
Factory notes for distributors and project buyers
LED neon flex draws lines of light where rigid battens cannot go: arches, lettering, facade perimeters and landscape curves in one continuous dot-free stroke. As an LED neon flex manufacturer, we build silicone tubes for outdoor and indoor runs: top-bend profiles that follow curves across the lit face, sealed bodies for rain and dust, cut-and-connect sections for custom lengths, and CCT options from warm facade white to daylight sign white.
Plan by run, not by reel. Fix the bending direction first, then total length and feed positions, then CCT against the surface: warm white settles heritage brickwork, neutral suits modern curtain walls, daylight punches through for sign strokes that must read at noon as well as at night. For area and path light in the same project, combine outlines with outdoor luminaires; for indoor accent layers see LED track lights. Because one page serves the whole range, new profiles join the card grid above without rewriting this guide: check the cards for the latest bend directions and mounting options before specifying. Send total lengths and a bending sketch through the form below for a project quote, and we will confirm cutting points and feed options.
Typical applications: facade perimeter outlines, sign cabinet borders, landscape curve accents, interior cove and lettering strokes. Full bending, cutting and mounting detail lives on the NEON-1010 flex page.
FAQ
Quick answers before you specify
The tube bends across its 10mm lit face, tracing arches and lettering. Bend radius, cutting points and mounting profiles are documented on the NEON-1010 flex page.
Yes. The silicone extrusion is sealed to IP67, so facade and landscape runs survive rain and washdowns; feed ends close with the supplied end caps.
Warm white settles heritage facades, neutral white suits modern curtain walls, daylight white punches through for signage. All three are covered in the range.
Runs join through cut-and-connect sections with feed and tail options. Send the total length and bending sketch through the form below for a project quote.
Send Message
Fill out the form and we will get back to you as soon as possible